Repeated jams almost always come from one of four causes. Work through them in order.
1. Paper
- Damp or curled paper from humid storage — keep reams sealed until use
- Paper heavier than the tray is rated for
- Overfilled trays or guides not set snugly
2. Environment
Very humid or very dry rooms, heat sources and exterior doors cause curl and static. Place the copier in a climate-controlled space.
3. Settings
A tray set to plain paper when it holds card stock or labels will jam. Match the paper type and size settings to what's loaded.
4. Worn parts
Pickup rollers, separation pads and fuser components wear with use. If jams continue after the first three checks — especially in the same spot — the machine needs service.
Clear jams safely
Follow the copier's on-screen guide, pull paper in the direction it travels, and avoid the fuser area, which gets hot. Never use tools inside the machine.
Still jamming? Request copier repair, or see preventive maintenance to keep it from happening.
Frequently asked questions
Why does my copier jam in the same spot?
Repeated jams in one location usually point to a worn roller, pad or sensor in that part of the paper path, which a technician should inspect.
